Print

Agri-Eldana: Cane Stalk Sprayer Attachment (for Eldana borer control)

Agri-Eldana Borer Stalk Sprayer attachmentSPECIFICATIONS
  • This bracket is an attachment for a Matabi or Osatu 16lt knapsack sprayer.
  • The bracket is constructed from mild steel flat bar.
  • The bracket clips onto the strap moulding and is held in place at the base by two 6 x 20mm bolts and nyloc nuts.
  • A double swivel-action nozzle holder with two Quick-Jet nozzle caps is held in place at the end of the bracket.
  • The TK1.5 or TK2.5 brass nozzles are positioned to spray in a vertical plane and slightly backwards.
  • 8mm black Kanaflex plastic piping from the nozzles connects into the standard trigger supplied with the knapsack.






Agri-Eldana Borer Stalk Sprayer attachmentFEATURES & BENEFITS
  • This bracket, when attached to a Matabi or Osatu 16 litre knapsack sprayer, provides a simple and effective method of delivery of a spray solution to a large percentage of the cane stalk as the operator walks along the cane row.
  • This attachment will allow the operator to spray two lines of cane in one pass.  He will have one free hand to move obstacles or keep his face clear. 
  • The nozzles are located approximately 440mm from the back of the operator to ensure minimal spray fluid onto the operator.
  • The TK1.5 or TK2.5 brass nozzles are positioned to spray in a vertical plane and slightly backwards to ensure minimal spray fluid onto the operator.
  • The nozzles are positioned in the centre of the row to optimise the spray cover onto the cane stalk from bottom to top.